PACKAGE NAME: hdparm-9.5-i586-1vl59.tlz PACKAGE LOCATION: ./base-apps PACKAGE SIZE (compressed): 56 K PACKAGE SIZE (uncompressed): 140 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: hdparm: hdparm (read/set hard drive parameters) hdparm: hdparm: hdparm provides a command line interface to a number of hard drive hdparm: ooctls supported by the Linux ATA/IDE device driver subsysem. It hdparm: may be used to tune hard drive performance hdparm: hdparm: hdparm: hdparm: License: GPL hdparm: Authors: http://sourceforge.net/projects/hdparm/ hdparm: Website: Mark Lord PACKAGE NAME: hplip-2.7.12-i586-5vl59.tlz PACKAGE LOCATION: ./base-apps PACKAGE SIZE (compressed): 11472 K PACKAGE SIZE (uncompressed): 24410 K PACKAGE REQUIRED: cups >= 1.3.3-i586-2vl59,cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,gcc >= 4.1.2-i486-1,glibc-solibs >= 2.5-i486-5,gnutls >= 1.6.2-i486-1,libgcrypt >= 1.2.4-i486-1,libgpg-error >= 1.5-i486-1,libieee1284 >= 0.2.10-i486-2,libjpeg >= 6b-i486-5,libtiff >= 3.8.2-i486-3,libusb >= 0.1.12-i486-2,net-snmp >= 5.4-i486-5,openssl >= 0.9.8f-i486-1 | openssl-solibs >= 0.9.8f-i486-1,python >= 2.5.1-i486-1,sane >= 1.0.18-i486-5,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: hplip: hplip (The Hewlett-Packard Linux Imaging and Printing project) hplip: hplip: The Hewlett-Packard Linux Imaging and Printing project (HPLIP) hplip: provides a unified single and multi-function connectivity hplip: solution for Linux. The goal of this project is to provide hplip: "radically simple" printing, faxing, scanning, photo-card hplip: access, and device management to the consumer and small hplip: business desktop Linux users. This project is based open source hplip: software and uses GPL compatible licenses. hplip: PACKAGE NAME: htop-0.8-i586-1vl59.tlz PACKAGE LOCATION: ./base-apps PACKAGE SIZE (compressed): 53 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,ncurses >= 5.6-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: htop: htop (an interactive process viewer) htop: htop: htop is an interactive process viewer like top. It displays system htop: processes, and allows them to be killed or reniced. Unlike top, it htop: is capable of killing multiple processes at once. htop: htop: htop: htop: License: GPL htop: Authors: Hisham H. Muhammad htop: Website: http://htop.sourceforge.net/ PACKAGE NAME: htop-0.8.2-i586-1vl59.tlz PACKAGE LOCATION: ./base-apps PACKAGE SIZE (compressed): 56 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,ncurses >= 5.6-i486-2,xterm >=-224-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: htop: htop (an interactive process viewer) htop: htop: htop is an interactive process viewer like top. It displays system htop: processes, and allows them to be killed or reniced. Unlike top, it htop: is capable of killing multiple processes at once. htop: htop: htop: htop: License: GPL htop: Authors: Hisham H. Muhammad htop: Website: http://htop.sourceforge.net/ PACKAGE NAME: nano-2.0.9-i586-1vl59.tlz PACKAGE LOCATION: ./base-apps PACKAGE SIZE (compressed): 349 K PACKAGE SIZE (uncompressed): 1560 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,ncurses >= 5.6-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: nano: nano (an open source alternative to the Pico text editor) nano: nano: Nano was started as an alternative to the Pico editor, due to nano: restrictions in the Pine licence. It is a powerful, user friendly nano: text editor with many options. nano: nano: nano: nano: License: GPL nano: Authors: Chris Allegretta & others nano: Website: http://www.nano-editor.org/ PACKAGE NAME: texinfo-4.13a-i586-1vl59.tlz PACKAGE LOCATION: ./base-apps PACKAGE SIZE (compressed): 1000 K PACKAGE SIZE (uncompressed): 3130 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,ncurses >= 5.6-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: texinfo: texinfo (a package for managing informatio in many formats) texinfo: texinfo: texinfo is a documentation system that uses a single source file to texinfo: produce both onlin information and printed output. It can create texinfo: a printed document and a menu-driven on-line info file with nodes. texinfo: menus, cross references and indices. texinfo: texinfo: texinfo: License: GPL texinfo: Authors: Karl Berry & others texinfo: Website: http://www.gnu.org/software/texinfo/ PACKAGE NAME: vcpufreq-2.0.0-i586-1vl59.tlz PACKAGE LOCATION: ./base-apps PACKAGE SIZE (compressed): 15 K PACKAGE SIZE (uncompressed): 80 K PACKAGE REQUIRED: bash >= 3.0,qt >= 3.3.5,gambas-runtime >= 2.9 | gambas >= 2.9 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vcpufreq: vcpufreq (cpufreq configuration utility) vcpufreq: vcpufreq: vcpufreq is a cpufreq configuration utility developed in Gambas by vcpufreq: Joe1962 for Vector Linux. It makes it easy to change cpufreq governor vcpufreq: and related frequency settings. It does not (yet) load the apropiate vcpufreq: cpufreq module for your system. Now with CLI vcpufreq-load to set vcpufreq: saved config on system start. vcpufreq: vcpufreq: Joe1962 vcpufreq: GNU LIBRARY GENERAL PUBLIC LICENSE, Version 2, June 1991 vcpufreq: PACKAGE NAME: cups-1.3.9-i486-1_slack12.0.tlz PACKAGE LOCATION: ./base PACKAGE SIZE (compressed): 2147 K PACKAGE SIZE (uncompressed): 12000 K PACKAGE REQUIRED: acl >= 2.2.39_1-i486-2,attr >= 2.4.32_1-i486-2,cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,cyrus-sasl >= 2.1.22-i486-1,dbus >= 1.0.2-i486-3,gcc >= 4.1.2-i486-1,glibc-solibs >= 2.5-i486-5,gnutls >= 1.6.2-i486-1,libgcrypt >= 1.2.4-i486-1,libgpg-error >= 1.5-i486-1,libjpeg >= 6b-i486-5,libpng >= 1.2.21-i486-1,libtiff >= 3.8.2-i486-3,openldap-client >= 2.3.32-i486-1,openssl >= 0.9.8h-i486-1_slack12.0 | openssl-solibs >= 0.9.8h-i486-1_slack12.0,perl >= 5.8.8-i486-4,python >= 2.5.1-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cups: CUPS (Common UNIX Printing System) cups: cups: The Common UNIX Printing System provides a portable printing layer for cups: UNIX(R)-like operating systems. It has been developed by Easy Software cups: Products to promote a standard printing solution for all UNIX vendors cups: and users. CUPS uses the Internet Printing Protocol ("IPP") as the cups: basis for managing print jobs and queues. The CUPS package includes cups: System V and Berkeley command-line interfaces, a PostScript RIP cups: package for supporting non-PostScript printer drivers, and tools for cups: creating additional printer drivers and other CUPS services. cups: PACKAGE NAME: hdparm-9.14-i586-1vl59.tlz PACKAGE LOCATION: ./base PACKAGE SIZE (compressed): 58 K PACKAGE SIZE (uncompressed): 140 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: hdparm: hdparm (read/set hard drive parameters) hdparm: hdparm: hdparm provides a command line interface to a number of hard drive hdparm: ooctls supported by the Linux ATA/IDE device driver subsysem. It hdparm: may be used to tune hard drive performance hdparm: hdparm: hdparm: hdparm: License: GPL hdparm: Authors: Mark Lord hdparm: Website: http://sourceforge.net/projects/hdparm/ PACKAGE NAME: lzma-4.32.7-i586-1vl59.tgz PACKAGE LOCATION: ./base PACKAGE SIZE (compressed): 90 K PACKAGE SIZE (uncompressed): 230 K PACKAGE REQUIRED: cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,gcc >= 4.1.2-i486-1,glibc-solibs >= 2.5-i486-5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: lzma: lzma (Compression utilities with a gzip-like interface) lzma: lzma: LZMA provides very high compression ratio and fast decompression. lzma: The core of the LZMA utils is Igor Pavlov's LZMA SDK containing lzma: the actual LZMA encoder/decoder. lzma: LZMA utils is required to support LZMA compressed .tlz packages. lzma: lzma: lzma: License: GPL lzma: Authors: Igor Pavlov lzma: Website: http://tukaani.org/lzma/ PACKAGE NAME: tar-1.21-i586-1vl59.tlz PACKAGE LOCATION: ./base PACKAGE SIZE (compressed): 697 K PACKAGE SIZE (uncompressed): 2650 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: tar: tar (archiving utility) tar: tar: GNU tar is an archiving program designed to store and extract files tar: from an archive file. Tarfiles can be written to tape or to a normal tar: file. Tar is capable of making use of compression programs to tar: reduce the size of the archive. tar: tar: License: GPL tar: Authors: John Gilmore & others tar: Website: http://www.gnu.org/software/tar/ PACKAGE NAME: vl-hot-1.9.21-noarch-1vl59.tlz PACKAGE LOCATION: ./base PACKAGE SIZE (compressed): 61 K PACKAGE SIZE (uncompressed): 140 K PACKAGE REQUIRED: bash >= 3.0,udev >= 0.94 PACKAGE CONFLICTS: PACKAGE SUGGESTS: libnotify,notification-daemon-xfce | notification-daemon PACKAGE DESCRIPTION: vl-hot: vl-hot (udev-based external block device automounting system) vl-hot: vl-hot: vl-hot is a udev-based external mass storage device automount system vl-hot: developed for Vector Linux SOHO 5.1. It should handle all external vl-hot: mass storage devices with scsi emulation (USB, Firewire, PCCard, etc). vl-hot: vl-hot: The vl-hot-config GUI utility is available in separate package. vl-hot: vl-hot: Joe1962 vl-hot: GNU LIBRARY GENERAL PUBLIC LICENSE, Version 2, June 1991 vl-hot: PACKAGE NAME: cmake-2.6.2-i586-1vl59.tlz PACKAGE LOCATION: ./dev PACKAGE SIZE (compressed): 3053 K PACKAGE SIZE (uncompressed): 20260 K PACKAGE REQUIRED: cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,gcc >= 4.1.2-i486-1,glibc-solibs >= 2.5-i486-5,libidn >= 0.6.10-i486-1,ncurses >= 5.6-i486-2,openssl >= 0.9.8h-i486-1_slack12.0 | openssl-solibs >= 0.9.8h-i486-1_slack12.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: cmake: cmake (the cross-platform, open-source make system.) cmake: CMake is used to control the software process using simple platform cmake: and compiler independed configuration files. CMake generates cmake: native makefiles and workspaces that can be used in the cmake: compiler environment of your choice. cmake: cmake: cmake: cmake: License: http://www.cmake.org/cmake/project/license.html cmake: Authors: http://www.cmake.org/cmake/project/parti.html cmake: Website: http://www.cmake.org PACKAGE NAME: libgnomecanvas-2.14.0-i586-1vl59.tlz PACKAGE LOCATION: ./gnome PACKAGE SIZE (compressed): 244 K PACKAGE SIZE (uncompressed): 1670 K PACKAGE REQUIRED: atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.5-i486-1,glib2 >= 2.12.13-i486-1,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libart_lgpl >= 2.3.19-i486-1,libglade >= 2.6.1-i486-1,libpng >= 1.2.21-i486-1,libxcb >= 1.0-i486-2,libxml2 >= 2.6.28-i486-1,pango >= 1.16.4-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgnomecanvas: libgnomecanvas (The GNOME canvas engine) libgnomecanvas: libgnomecanvas: The GNOME canvas is an engine for structured graphics that libgnomecanvas: offers a rich imaging model, high performance rendering, and a libgnomecanvas: powerful, high-level API. It offers a choice of two rendering libgnomecanvas: back-ends, one based on Xlib for extremely fast display, and libgnomecanvas: another based on Libart, a sophisticated, antialiased, libgnomecanvas: alpha-compositing engine. Applications have a choice between libgnomecanvas: the Xlib imaging model or a superset of the PostScript imaging libgnomecanvas: model, depending on the level of graphic sophistication libgnomecanvas: required. libgnomecanvas: libgnomecanvas: License: GNU GPL libgnomecanvas: Website: http://www.gnome.org libgnomecanvas: Authors: Many, see website libgnomecanvas: PACKAGE NAME: alsa-driver-1.0.16_2.6.22.14-i586-1vl59.tlz PACKAGE LOCATION: ./kernel PACKAGE SIZE (compressed): 1257 K PACKAGE SIZE (uncompressed): 5590 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: alsa-driver: alsa sound driver modules alsa-driver: PACKAGE NAME: ndiswrapper-1.53_2.6.25.7-i586_vectorlinux-1vl59.tlz PACKAGE LOCATION: ./kernel PACKAGE SIZE (compressed): 98 K PACKAGE SIZE (uncompressed): 330 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ndiswrapper: ndiswrapper (Linux wrapper for Windows network drivers) ndiswrapper: ndiswrapper: Some vendors do not release specifications of the hardware or provide ndiswrapper: a Linux driver for their wireless network cards. This project ndiswrapper: implements Windows kernel API and NDIS (Network Driver Interface ndiswrapper: Specification) API within Linux kernel. A Windows driver for ndiswrapper: wireless network card is then linked to this implementation so that ndiswrapper: the driver runs natively, as though it is in Windows, without binary ndiswrapper: emulation. ndiswrapper: ndiswrapper: PACKAGE NAME: novmsplice-1.0_2.6.22.14-i586-1vl59.tlz PACKAGE LOCATION: ./kernel PACKAGE SIZE (compressed): 1 K PACKAGE SIZE (uncompressed): 20 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: novmsplice: The novmsplice kernel module prevents the vmsplice syscall. novmsplice: novmsplice: There is an exploit which allows users to get root permissions novmsplice: Without the root password. It uses the vmsplice syscall, novmsplice: which has always had this problem. novmsplice: This fix is a simple kernel module, which disables the novmsplice: vulnerable system call. novmsplice: novmsplice: novmsplice: novmsplice: PACKAGE NAME: alsa-lib-1.0.17-i586-1vl59.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 1279 K PACKAGE SIZE (uncompressed): 4000 K PACKAGE REQUIRED: bash >= 3.1.017,gtk+2 >= 2.10.14,atk >= 1.18.0,pango >= 1.16.4,cairo >= 1.4.10,glib2 >= 2.12.13,libX11 >= 1.1.3,libXfixes >= 4.0.3,fontconfig >= 2.4.2,libXext >= 1.0.3,libXrender >= 0.9.4,libXinerama >= 1.0.2,libXi >= 1.1.3,libXrandr >= 1.2.2,libXcursor >= 1.1.9,freetype >= 2.3.5,zlib >= 1.2.3,libpng >= 1.2.21,libxcb >= 1.0,expat >= 2.0.1,libXau >= 1.0.3,libXdmcp >= 1.0.2,cxxlibs >= 6.0.8,gcc >= 4.1.2,ncurses >= 5.6,python >= 2.5.1,ffmpeg >= 20070917,faac >= 1.25,libgsm >= 1.0.10_13,lame >= 3.97,libtheora >= 1.0beta1,libvorbis >= 1.2.0,x264 >= 20070917,xvidcore >= 1.1.3,libogg >= 1.1.3 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: alsa-lib: Advanced Linux Sound Architecture libs utils tools oss and plugins alsa-lib: alsa-lib: The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI alsa-lib: functionality to the Linux operating system. This is the ALSA libs alsa-lib: utils tools oss and plugins which are used by audio applications. alsa-lib: alsa-lib: For more information, see http://alsa-project.org alsa-lib: alsa-lib: alsa-lib: alsa-lib: PACKAGE NAME: bluez-libs-3.31-i586-1vl59.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 73 K PACKAGE SIZE (uncompressed): 320 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bluez-libs: bluez-libs (bluez-libs-3.31) bluez-libs: The overall goal of this project is to make an implementation of the bluez-libs: Bluetooth wireless standards specifications for Linux. bluez-libs: bluez-libs: bluez-libs: bluez-libs: bluez-libs: bluez-libs: License: GPL bluez-libs: Authors: Bluetooth Protocal Stack bluez-libs: Website: http://www.bluez.org/ PACKAGE NAME: freetype-2.3.8-i586-1vl59.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 609 K PACKAGE SIZE (uncompressed): 3490 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: freetype: freetype (a portable font engine) freetype: freetype: Freetype is a free, high-quality, portable font engine freetype: This build has the byte-code interpreter enabled, so it may have freetype: patent issues. freetype: freetype: freetype: License: GPL freetype: Authors: David Turner and others freetype: Website: http://www.freetype.org PACKAGE NAME: libao-0.8.8-i586-1vl59.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 36 K PACKAGE SIZE (uncompressed): 210 K PACKAGE REQUIRED: alsa-lib >= 1.0.14a-i486-1,audiofile >= 0.2.6-i486-2,esound >= 0.2.38-i486-1,glibc-solibs >= 2.5-i486-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libao: libao (Cross-Platform Audio Output Library) libao: libao: Libao is a cross-platform audio output library. It currently supports libao: ESD, aRts, ALSA, OSS, *BSD and Solaris. libao: libao: libao: libao: libao: License: GPL libao: Author: Xiph.org Foundation libao: Website: http://www.xiph.org/ PACKAGE NAME: libdvdcss-1.2.10-i586-1vl59.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 45 K PACKAGE SIZE (uncompressed): 190 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libdvdcss: libdvdcss (a simple library for accessing DVDs as block devices) libdvdcss: libdvdcss: libdvdcss is simple library for accessing DVDs as block devices libdvdcss: without having to be concerend about encryption or region locking libdvdcss: in the DVD drive. libdvdcss: libdvdcss: libdvdcss: libdvdcss: License: GPL libdvdcss: Authors: Many. See docs libdvdcss: Website: http://www.videolan.org/developers/libdvdcss.html PACKAGE NAME: libgnomeprint-2.2.0-i586-1vl59.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 307 K PACKAGE SIZE (uncompressed): 1430 K PACKAGE REQUIRED: cups >= 1.3.6-i586-2vl59,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.5-i486-1,glib2 >= 2.12.13-i486-1,glibc-solibs >= 2.5-i486-5,libart_lgpl >= 2.3.19-i486-1,libxml2 >= 2.6.28-i486-1,openssl >= 0.9.8f-i486-1 | openssl-solibs >= 0.9.8f-i486-1,pango >= 1.16.4-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgnomeprint: libgnomeprint (libgnomeprint-2.2.0) libgnomeprint: The libgnomeprint package contains libgnomeprint libraries. libgnomeprint: libgnomeprint: libgnomeprint: libgnomeprint: libgnomeprint: libgnomeprint: License: GPL libgnomeprint: Authors: gnome libgnomeprint: Website: http://www.linuxfromscratch.org/blfs/view/svn/gnome/libgnomecups.html PACKAGE NAME: libgphoto2-2.4.6-i586-1vl59.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 993 K PACKAGE SIZE (uncompressed): 6520 K PACKAGE REQUIRED: dbus >= 1.0.2-i486-3,glibc-solibs >= 2.5-i486-5,hal >= 0.5.10-i486-1,libexif >= 0.6.16-i486-1,libjpeg >= 6b-i486-5,libtool >= 1.5.24-i486-1,libusb >= 0.1.12-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libgphoto2: libgphoto2 (a library to access various digital cameras) libgphoto2: libgphoto2: libgphoto2 is a library that can be used by applications to access libgphoto2: various digital cameras. It is used by various applications such libgphoto2: as gphoto2, gthumb and others libgphoto2: libgphoto2: libgphoto2: libgphoto2: License: GPL libgphoto2: Authors: Scott Fritzinger & others libgphoto2: Website: http://www.gphoto.com/ PACKAGE NAME: libmad-0.15.1b-i586-1vl59.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 88 K PACKAGE SIZE (uncompressed): 290 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libmad: libmad (MPEG audio decoder) libmad: libmad: MAD (libmad) is a high-quality MPEG audio decoder. It currently libmad: supports MPEG-1 and the MPEG-2 extension to Lower Sampling Frequencies, libmad: as well as the so-called MPEG 2.5 format. All three audio layers libmad: (Layer I, Layer II, and Layer III a.k.a. MP3) are fully implemented. libmad: libmad: License: GPL libmad: Website: http://www.underbit.com/products/mad/ libmad: Authors: Robert Leslie libmad: PACKAGE NAME: libpng-1.2.37-i486-1_slack12.0.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 289 K PACKAGE SIZE (uncompressed): 1200 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libpng: libpng (Portable Network Graphics library) libpng: libpng: PNG (Portable Network Graphics) is an extensible file format for the libpng: lossless, portable, well-compressed storage of raster images. PNG libpng: provides a patent-free replacement for GIF and can also replace many libpng: common uses of TIFF. Indexed-color, grayscale, and truecolor images libpng: are supported, plus an optional alpha channel. Sample depths range libpng: from 1 to 16 bits. libpng: libpng: libpng: PACKAGE NAME: libxml2-2.6.32-i486-1_slack12.0.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 1450 K PACKAGE SIZE (uncompressed): 10030 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libxml2: libxml2 (XML parser library) libxml2: libxml2: Libxml2 is the XML C parser library and toolkit. XML itself is a libxml2: metalanguage to design markup languages -- i.e. a text language where libxml2: structures are added to the content using extra "markup" information libxml2: enclosed between angle brackets. HTML is the most well-known markup libxml2: language. Though the library is written in C, a variety of language libxml2: bindings make it available in other environments. libxml2: libxml2: libxml2: PACKAGE NAME: libxslt-1.1.24-i486-1_slack12.0.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 409 K PACKAGE SIZE (uncompressed): 2740 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,libgcrypt >= 1.2.4-i486-1,libgpg-error >= 1.5-i486-1,libxml2 >= 2.6.28-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: libxslt: libxslt (XML transformation library) libxslt: libxslt: XSLT support for libxml2. (XSLT is a language used for transforming libxslt: XML documents) libxslt: libxslt: libxslt: libxslt: libxslt: libxslt: libxslt: PACKAGE NAME: net-snmp-5.4.2.1-i486-1_slack12.0.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 1760 K PACKAGE SIZE (uncompressed): 8020 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,openssl >= 0.9.8h-i486-1_slack12.0 | openssl-solibs >= 0.9.8h-i486-1_slack12.0,perl >= 5.8.8-i486-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: net-snmp: net-snmp (Simple Network Management Protocol tools) net-snmp: net-snmp: Various tools relating to the Simple Network Management Protocol: net-snmp: net-snmp: An extensible agent net-snmp: An SNMP library net-snmp: Tools to request or set information from SNMP agents net-snmp: Tools to generate and handle SNMP traps net-snmp: A version of the unix 'netstat' command using SNMP net-snmp: A graphical Perl/Tk/SNMP based mib browser net-snmp: PACKAGE NAME: openssl-0.9.8h-i486-2_slack12.0.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 2344 K PACKAGE SIZE (uncompressed): 9270 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,openssl-solibs >= 0.9.8h-i486-2_slack12.0,perl >= 5.8.8-i486-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openssl: openssl (Secure Sockets Layer toolkit) openssl: openssl: The OpenSSL certificate management tool and the shared libraries that openssl: provide various encryption and decryption algorithms and protocols. openssl: openssl: This product includes software developed by the OpenSSL Project for openssl: use in the OpenSSL Toolkit (http://www.openssl.org). This product openssl: includes cryptographic software written by Eric Young openssl: (eay@cryptsoft.com). This product includes software written by Tim openssl: Hudson (tjh@cryptsoft.com). openssl: PACKAGE NAME: openssl-solibs-0.9.8h-i486-2_slack12.0.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 659 K PACKAGE SIZE (uncompressed): 2090 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,openssl >= 0.9.8h-i486-2_slack12.0,perl >= 5.8.8-i486-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openssl-solibs: openssl-solibs (OpenSSL shared libraries) openssl-solibs: openssl-solibs: These shared libraries provide encryption routines required by openssl-solibs: programs such as openssh. They are also used by KDE's Konqueror web openssl-solibs: browser to provide secure web connections. openssl-solibs: openssl-solibs: This product includes software developed by the OpenSSL Project for openssl-solibs: use in the OpenSSL Toolkit (http://www.openssl.org). This product openssl-solibs: includes cryptographic software written by Eric Young openssl-solibs: (eay@cryptsoft.com). This product includes software written by Tim openssl-solibs: Hudson (tjh@cryptsoft.com). PACKAGE NAME: pcre-7.7-i486-1_slack12.0.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 374 K PACKAGE SIZE (uncompressed): 1200 K PACKAGE REQUIRED: cxxlibs | gcc-g++,gcc,glibc-solibs PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pcre: pcre (Perl-compatible regular expression library) pcre: pcre: The PCRE library is a set of functions that implement regular pcre: expression pattern matching using the same syntax and semantics as pcre: Perl 5, with just a few differences (documented in the man page). pcre: pcre: The PCRE library is used by KDE's Konqueror browser. pcre: pcre: pcre: pcre: PACKAGE NAME: poppler-0.6.3-i586-1vl59.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 680 K PACKAGE SIZE (uncompressed): 3260 K PACKAGE REQUIRED: cairo >= 1.4.10-i486-1,cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.5-i486-1,gcc >= 4.1.2-i486-1,glib2 >= 2.12.13-i486-1,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libjpeg >= 6b-i486-5,libpng >= 1.2.21-i486-1,libxcb >= 1.0-i486-2,libxml2 >= 2.6.28-i486-1,pango >= 1.16.4-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: poppler: poppler (a library for rendering PDF documents) poppler: poppler: Poppler is a library based on the xpdf PDF viewer developed by Derek poppler: Noonburg of Glyph and Cog, LLC. Since xpdf does not provide a shared poppler: library, whenever a flaw was found potentially dozens of applications poppler: incorporating code from xpdf would have to be patched. By providing poppler: a centralized PDF library this duplicated effort will be eliminated. poppler: poppler: poppler: poppler homepage: http://poppler.freedesktop.org/ poppler: PACKAGE NAME: poppler-data-0.2.0-noarch-1vl59.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 1404 K PACKAGE SIZE (uncompressed): 11590 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: poppler-data: poppler-data (encoding files used by poppler) poppler-data: poppler-data: This package consists of encoding files for use with poppler. The poppler-data: encoding files are optional and poppler will automatically read them poppler-data: if they are present. When installed, the encoding files enables poppler-data: poppler to correctly render CJK and Cyrillic properly. While poppler poppler-data: is licensed under the GPL, these encoding files are copyright Adobe poppler-data: and licensed much more strictly, and thus distributed separately. poppler-data: poppler-data: poppler homepage: http://poppler.freedesktop.org/ poppler-data: PACKAGE NAME: slang-2.0.7-i586-1vl59.tlz PACKAGE LOCATION: ./libs PACKAGE SIZE (compressed): 405 K PACKAGE SIZE (uncompressed): 1810 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: slang: slang (slang-2.0.7) slang: Slang (pronounced sssslang'') is a powerful stack slang: based interpreter that supports a C-like syntax. It has slang: been designed from the beginning to be easily slang: embedded into a program to make it extensible. Slang slang: also provides a way to quickly develop and debug the slang: application embedding it in a safe and efficient manner. slang: slang: License: GPL slang: Authors: John E. Davis slang: Website: http://www.jedsoft.org/slang/index.html PACKAGE NAME: apr-1.3.5-i486-1_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 211 K PACKAGE SIZE (uncompressed): 980 K PACKAGE REQUIRED: e2fsprogs >= 1.39-i486-1,glibc-solibs >= 2.5-i486-5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: apr: apr (Apache Portable Runtime) apr: apr: The mission of the Apache Portable Runtime (APR) is to provide a apr: free library of C data structures and routines, forming a system apr: portability layer to as many operating systems as possible. apr: apr: apr: apr: apr: apr: PACKAGE NAME: apr-util-1.3.7-i486-1_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 109 K PACKAGE SIZE (uncompressed): 470 K PACKAGE REQUIRED: apr >= 1.2.8-i486-1,cyrus-sasl >= 2.1.22-i486-1,e2fsprogs >= 1.39-i486-1,expat >= 2.0.1-i486-1,glibc-solibs >= 2.5-i486-5,openldap-client >= 2.3.32-i486-1,openssl >= 0.9.8h-i486-3_slack12.0 | openssl-solibs >= 0.9.8h-i486-3_slack12.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: apr-util: apr-util (Apache Portable Runtime utilities) apr-util: apr-util: The mission of the Apache Portable Runtime (APR) is to provide a apr-util: free library of C data structures and routines, forming a system apr-util: portability layer to as many operating systems as possible. apr-util: apr-util: This package contains additional utility interfaces for APR; apr-util: including support for XML, LDAP, database interfaces, URI parsing, apr-util: and more. apr-util: apr-util: PACKAGE NAME: bind-9.4.3_P3-i486-1_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 1589 K PACKAGE SIZE (uncompressed): 5600 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,openssl >= 0.9.8h-i486-3_slack12.0 | openssl-solibs >= 0.9.8h-i486-3_slack12.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: bind: bind (DNS server and utilities) bind: bind: The named daemon and support utilities such as dig, host, and bind: nslookup. Sample configuration files for running a simple caching bind: nameserver are included. Documentation for advanced name server bind: setup can be found in /usr/doc/bind-9.x.x/. bind: bind: bind: bind: bind: PACKAGE NAME: dhcp-3.1.2p1-i486-1_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 427 K PACKAGE SIZE (uncompressed): 1600 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dhcp: dhcp (DHCP server and client utilities) dhcp: dhcp: This package provides the ISC's DHCP utilities, including both a dhcp: server and client. The DHCP protocol allows a host to contact a dhcp: central server which maintains a list of IP addresses which may be dhcp: assigned on one or more subnets. A DHCP client may request an dhcp: address from this pool, and then use it temporarily for communication dhcp: on the network. The DHCP protocol also provides a mechanism whereby dhcp: a client can learn important details about the network to which it is dhcp: attached, such as the location of a default router or name server. dhcp: PACKAGE NAME: dillo-2.0-i586-3vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 479 K PACKAGE SIZE (uncompressed): 1720 K PACKAGE REQUIRED: cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.7-i586-1vl59,gcc >= 4.1.2-i486-1,glibc-solibs >= 2.5-i486-5,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXft >= 2.1.12-i486-2,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrender >= 0.9.4-i486-1,libjpeg >= 6b-i486-5,libpng >= 1.2.29-i586-1vl59,libxcb >= 1.0-i486-2,openssl >= 0.9.8h-i486-1_slack12.0 | openssl-solibs >= 0.9.8h-i486-1_slack12.0,perl >= 5.8.8-i486-4,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: dillo: dillo (Lightweight Web Browser) dillo: dillo: Dillo is a multi-platform graphical web browser known for its dillo: speed and small size. Dillo is written in C and C++ and is dillo: based on FLTK2, the Fast Light Toolkit. Our users will dillo: surely enjoy this new release as it will give them the same dillo: things they're accustomed plus tabbed browsing, dillo: antialiasing, different character sets, etc... dillo: License: GNU General Public License, Version 3 dillo: Authors: Jorge Arellano Cid & others dillo: Website: http://www.dillo.org/ PACKAGE NAME: firefox-3.5.15-i586-1vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 8521 K PACKAGE SIZE (uncompressed): 29780 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: firefox: Firefox (Mozilla Firefox Web Browser) firefox: firefox: Firefox 3 is the next generation release of the award-winning firefox: Firefox web browser from Mozilla. firefox: To comply with Mozilla trademarks, and to assure quality control, firefox: this is the official Mozilla build, packaged for VectorLinux. firefox: firefox: firefox: License: MPL 1.1/GPL 2.0/LGPL 2.1 firefox: Author: Mozilla Foundation firefox: Website: http://www.mozilla.com/en-US/firefox/ PACKAGE NAME: gftp-2.0.19-i586-1vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 617 K PACKAGE SIZE (uncompressed): 3810 K PACKAGE REQUIRED: atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.7-i586-1vl59,glib2 >= 2.16.6-i586-1vl59,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,libpng >= 1.2.29-i586-1vl59,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libxcb >= 1.0-i486-2,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,ncurses >= 5.6-i486-2,openssl >= 0.9.8h-i486-1_slack12.0 | openssl-solibs >= 0.9.8h-i486-1_slack12.0,pango >= 1.16.4-i486-1,readline >= 5.2-i486-2,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gftp: gftp (a multithreaded ftp client with both text and GUI interfaces) gftp: gftp: gFTP is a multithreaded FTP client for X written using GTK+. It gftp: features simultaneous downloads, resume of interrupted file gftp: transfers, file transfer queues, downloading of entire directories, gftp: ftp proxy support, remote directory caching, passive and non-passive gftp: file transfers, drag-n-drop support, bookmarks menu, stop button, gftp: as well as many other features gftp: License: GPL gftp: Authors: Brian Masney gftp: Website: http://www.gftp.org/ PACKAGE NAME: gftp-2.0.19-i586-2vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 616 K PACKAGE SIZE (uncompressed): 3810 K PACKAGE REQUIRED: atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.8-i586-1vl59,glib2 >= 2.12.12-i486-1,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libpng >= 1.2.29-i586-1vl59,libxcb >= 1.0-i486-2,ncurses >= 5.6-i486-2,openssl >= 0.9.8h-i486-2_slack12.0 | openssl-solibs >= 0.9.8h-i486-2_slack12.0,pango >= 1.16.4-i486-1,readline >= 5.2-i486-2,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gftp: gftp (a multithreaded ftp client with both text and GUI interfaces) gftp: gftp: gFTP is a multithreaded FTP client for X written using GTK+. It gftp: features simultaneous downloads, resume of interrupted file gftp: transfers, file transfer queues, downloading of entire directories, gftp: ftp proxy support, remote directory caching, passive and non-passive gftp: file transfers, drag-n-drop support, bookmarks menu, stop button, gftp: as well as many other features gftp: License: GPL gftp: Authors: Brian Masney gftp: Website: http://www.gftp.org/ PACKAGE NAME: gnutls-2.6.2-i486-2_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 1366 K PACKAGE SIZE (uncompressed): 3360 K PACKAGE REQUIRED: cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,gcc >= 4.1.2-i486-1,glibc-solibs >= 2.5-i486-5,gmp >= 4.2.1-i486-2,guile >= 1.8.0-i486-1,libgcrypt >= 1.2.4-i486-1,libgpg-error >= 1.5-i486-1,libtool >= 1.5.24-i486-1,ncurses >= 5.6-i486-2,readline >= 5.2-i486-2,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gnutls: gnutls (GNU TLS library) gnutls: gnutls: This is a TLS (Transport Layer Security) 1.0 and SSL (Secure Sockets gnutls: Layer) 3.0 implementation. In brief, GnuTLS can be described as a gnutls: library which offers an API to access secure communication protocols. gnutls: These protocols provide privacy over insecure lines, and were designed gnutls: to prevent eavesdropping, tampering, or message forgery. gnutls: gnutls: Homepage: http://www.gnu.org/software/gnutls/ gnutls: gnutls: PACKAGE NAME: grsync-0.6.2-i586-1vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 66 K PACKAGE SIZE (uncompressed): 290 K PACKAGE REQUIRED: atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.7-i586-1vl59,glib2 >= 2.12.12-i486-1,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,libpng >= 1.2.29-i586-1vl59,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libxcb >= 1.0-i486-2,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,pango >= 1.16.4-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: grsync: grsync (a Graphical User Interface for rsync) grsync: grsync: Grsync is a GUI (Graphical User Interface) for rsync, the commandline grsync: directory synchronization tool. It doesn't support all rsync grsync: features but can be effectively used ot shnchronize local directories grsync: and supports remote tragets to a limited degree. It is mainly meant grsync: as a user friendly way to backup files under Linux grsync: grsync: License: GPL grsync: Authors: Piero Orsoni (info@opbyte.it) grsync: Website: http://www.opbyte.it/grsync/ PACKAGE NAME: httpd-2.2.12-i486-1_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 1377 K PACKAGE SIZE (uncompressed): 6970 K PACKAGE REQUIRED: apr >= 1.2.8-i486-1,apr-util >= 1.2.8-i486-1,cyrus-sasl >= 2.1.22-i486-1,e2fsprogs >= 1.39-i486-1,expat >= 2.0.1-i486-1,glibc-solibs >= 2.5-i486-5,openldap-client >= 2.3.32-i486-1,openssl >= 0.9.8h-i486-3_slack12.0 | openssl-solibs >= 0.9.8h-i486-3_slack12.0,pcre >= 7.3-i486-1,perl >= 5.8.8-i486-4,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: httpd: httpd (The Apache HTTP Server) httpd: httpd: Apache is an HTTP server designed as a plug-in replacement for the httpd: NCSA HTTP server. It fixes numerous bugs in the NCSA server and httpd: includes many frequently requested new features, and has an API which httpd: allows it to be extended to meet users' needs more easily. httpd: httpd: Apache is the most popular web server in the known universe; over httpd: half of the servers on the Internet are running Apache or one of httpd: its variants. httpd: PACKAGE NAME: net-snmp-5.4.1.2-i486-1_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 1306 K PACKAGE SIZE (uncompressed): 5860 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,openssl >= 0.9.8h-i486-1_slack12.0 | openssl-solibs >= 0.9.8h-i486-1_slack12.0,perl >= 5.8.8-i486-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: net-snmp: net-snmp (Simple Network Management Protocol tools) net-snmp: net-snmp: Various tools relating to the Simple Network Management Protocol: net-snmp: net-snmp: An extensible agent net-snmp: An SNMP library net-snmp: Tools to request or set information from SNMP agents net-snmp: Tools to generate and handle SNMP traps net-snmp: A version of the unix 'netstat' command using SNMP net-snmp: A graphical Perl/Tk/SNMP based mib browser net-snmp: PACKAGE NAME: ntp-4.2.4p7-i486-1_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 1152 K PACKAGE SIZE (uncompressed): 3110 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,ncurses >= 5.6-i486-2,openssl >= 0.9.8h-i486-3_slack12.0 | openssl-solibs >= 0.9.8h-i486-3_slack12.0,perl >= 5.8.8-i486-4,readline >= 5.2-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: ntp: ntp (Network Time Protocol daemon) ntp: ntp: The Network Time Protocol (NTP) is used to synchronize the time of a ntp: computer client or server to another server or reference time source, ntp: such as a radio or satellite receiver or modem. It provides client ntp: accuracies typically within a millisecond on LANs and up to a few tens ntp: of milliseconds on WANs relative to a primary server synchronized to ntp: Coordinated Universal Time (UTC) via a Global Positioning Service ntp: (GPS) receiver, for example. ntp: ntp: PACKAGE NAME: openssh-5.1p1-i486-1_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 483 K PACKAGE SIZE (uncompressed): 1970 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,openssl >= 0.9.8h-i486-1_slack12.0 | openssl-solibs >= 0.9.8h-i486-1_slack12.0,ppp >= 2.4.4-i486-1 | shadow >= 4.0.3-i486-14,shadow >= 4.0.3-i486-14,xauth >= 1.0.2-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openssh: openssh (Secure Shell daemon and clients) openssh: openssh: ssh (Secure Shell) is a program for logging into a remote machine and openssh: for executing commands on a remote machine. It is intended to replace openssh: rlogin and rsh, and provide secure encrypted communications between openssh: two untrusted hosts over an insecure network. sshd (SSH Daemon) is openssh: the daemon program for ssh. OpenSSH is based on the last free version openssh: of Tatu Ylonen's SSH, further enhanced and cleaned up by Aaron openssh: Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt, and openssh: Dug Song. It has a homepage at http://www.openssh.com/ openssh: PACKAGE NAME: openssl-0.9.8h-i486-3_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 2330 K PACKAGE SIZE (uncompressed): 9270 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,openssh = 5.1p1-i486-1_slack12.0,openssl-solibs = 0.9.8h-i486-3_slack12.0,perl >= 5.8.8-i486-4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openssl: openssl (Secure Sockets Layer toolkit) openssl: openssl: The OpenSSL certificate management tool and the shared libraries that openssl: provide various encryption and decryption algorithms and protocols. openssl: openssl: This product includes software developed by the OpenSSL Project for openssl: use in the OpenSSL Toolkit (http://www.openssl.org). This product openssl: includes cryptographic software written by Eric Young openssl: (eay@cryptsoft.com). This product includes software written by Tim openssl: Hudson (tjh@cryptsoft.com). openssl: PACKAGE NAME: openssl-solibs-0.9.8h-i486-3_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 658 K PACKAGE SIZE (uncompressed): 2090 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5,openssh = 5.1p1-i486-1_slack12.0,openssl = 0.9.8h-i486-3_slack12.0 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: openssl-solibs: openssl-solibs (OpenSSL shared libraries) openssl-solibs: openssl-solibs: These shared libraries provide encryption routines required by openssl-solibs: programs such as openssh. They are also used by KDE's Konqueror web openssl-solibs: browser to provide secure web connections. openssl-solibs: openssl-solibs: This product includes software developed by the OpenSSL Project for openssl-solibs: use in the OpenSSL Toolkit (http://www.openssl.org). This product openssl-solibs: includes cryptographic software written by Eric Young openssl-solibs: (eay@cryptsoft.com). This product includes software written by Tim openssl-solibs: Hudson (tjh@cryptsoft.com). PACKAGE NAME: pidgin-2.6.3-i586-1vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 6372 K PACKAGE SIZE (uncompressed): 30850 K PACKAGE REQUIRED: aspell >= 0.60.5-i486-2,atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,coreutils >= 6.9-i486-1,cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,cyrus-sasl >= 2.1.22-i486-1,dbus >= 1.0.2-i486-3,dbus-glib >= 0.74-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.9-i586-1vl59,gcc >= 4.1.2-i486-1,glib2 >= 2.12.13-i486-1,glibc-solibs >= 2.5-i486-5,gnutls >= 2.6.2-i486-2_slack12.0,gstreamer >= 0.10.13-i586-1vl6,gtk+2 >= 2.10.14-i486-1,gtkspell >= 2.0.11-i586-1vl59,libICE >= 1.0.4-i486-1,libSM >= 1.0.3-i486-1,libX11 >= 1.1.3-i486-1,libXScrnSaver >= 1.1.2-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libgcrypt >= 1.2.4-i486-1,libgpg-error >= 1.5-i486-1,libidn >= 0.6.10-i486-1,libpng >= 1.2.37-i486-1_slack12.0,libxcb >= 1.0-i486-2,libxml2 >= 2.6.28-i486-1,ncurses >= 5.6-i486-2,pango >= 1.16.4-i486-1,perl >= 5.8.8-i486-4,python >= 2.5.2-i586-3vl59,sqlite3 >= 3.4.2-i586-1vl59,startup-notification >= 0.8-i486-2,tcl >= 8.4.16-i486-1,tk >= 8.4.16-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: pidgin: pidgin (multi-protocol Instant Messaging client) pidgin: pidgin: Pidgin is an instant messaging program for Windows, Linux, BSD, pidgin: and other Unixes. You can talk to your friends using AIM, ICQ, pidgin: Jabber/XMPP, MSN Messenger, Yahoo!, Bonjour, Gadu-Gadu, IRC, pidgin: Novell GroupWise Messenger, QQ, Lotus Sametime, SILC, SIMPLE, pidgin: MySpaceIM, and Zephyr. pidgin: pidgin: License: GPL pidgin: Authors: Sean Egan pidgin: Website: http://www.pidgin.im/ PACKAGE NAME: rsync-3.0.6-i586-1vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 280 K PACKAGE SIZE (uncompressed): 640 K PACKAGE REQUIRED: acl >= 2.2.39_1-i486-2,attr >= 2.4.32_1-i486-2,glibc-solibs >= 2.5-i486-5,popt >= 1.7-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: rsync: rsync (a remote file sync utility) rsync: rsync: rsync is a replacement for rcp with many more features. It uses rsync: the "rsync algorithm" which provides a very fast method for rsync: bringing remote files into sync. It does this by sending just the rsync: differences in the files across the link, without requiring that both rsync: sets of files are present at one of the ends of the link beforehand. rsync: License: GPL rsync: Authors: Andrew Tridgell and Paul Mackerras rsync: Website: http://rsync.samba.org/ PACKAGE NAME: samba-3.0.35-i486-1_slack12.0.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 12091 K PACKAGE SIZE (uncompressed): 54510 K PACKAGE REQUIRED: acl >= 2.2.39_1-i486-2,attr >= 2.4.32_1-i486-2,coreutils >= 6.9-i486-1,cups >= 1.3.3-i586-2vl59,cyrus-sasl >= 2.1.22-i486-1,dmapi >= 2.2.5_1-i486-2,gamin >= 0.1.8-i486-2,glibc-solibs >= 2.5-i486-5,gnutls >= 1.6.2-i486-1,libgcrypt >= 1.2.4-i486-1,libgpg-error >= 1.5-i486-1,ncurses >= 5.6-i486-2,openldap-client >= 2.3.32-i486-1,openssl >= 0.9.8h-i486-3_slack12.0 | openssl-solibs >= 0.9.8h-i486-3_slack12.0,perl >= 5.8.8-i486-4,popt >= 1.7-i486-2,readline >= 5.2-i486-2,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: samba: samba (SMB file and print server) samba: samba: Samba is an SMB file and print server for SMB and CIFS clients. It samba: allows you to make file space or printers on a Samba host available to samba: any PCs running SMB clients (such as PCs running Windows). samba: samba: If you have any SMB servers (such as Windows NT/2K Server), you may be samba: able to replace them by or supplement them with Samba. One of Samba's samba: big strengths is integration, so you can use it to tie together your samba: Linux hosts and Windows PC clients. samba: PACKAGE NAME: seamonkey-1.1.17-i586-1vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 18294 K PACKAGE SIZE (uncompressed): 74800 K PACKAGE REQUIRED: aaa_elflibs >= 12.0.0-i486-3 | expat >= 2.0.1-i486-1,aaa_elflibs >= 12.0.0-i486-3 | gcc >= 4.1.2-i486-1,aaa_elflibs >= 12.0.0-i486-3 | glib2 >= 2.12.12-i486-1,aaa_elflibs >= 12.0.0-i486-3 | zlib >= 1.2.3-i486-2,atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.5-i486-1,glibc >= 2.5-i486-5 | glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,libICE >= 1.0.4-i486-1,libSM >= 1.0.3-i486-1,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXft >= 2.1.12-i486-2,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libXt >= 1.0.5-i486-1,libidl >= 0.8.7-i486-1,libpng >= 1.2.21-i486-1,libxcb >= 1.0-i486-2,pango >= 1.16.4-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: seamonkey: SeaMonkey (an open-source web browser suite) seamonkey: seamonkey: The SeaMonkey browser suite. SeaMonkey features a state-of-the-art seamonkey: web browser and powerful email client, as well as a WYSIWYG web page seamonkey: composer and a feature-rich IRC chat client. For web seamonkey: developers, mozilla.org's DOM inspector and JavaScript debugger tools seamonkey: are included as well. seamonkey: seamonkey: License: MPL 1.1/GPL 2.0/LGPL 2.1 seamonkey: Authors: The SeaMonkey Project seamonkey: Website: http://www.seamonkey-project.org/ PACKAGE NAME: thunderbird-2.0.0.21-i586-1vl60.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 8497 K PACKAGE SIZE (uncompressed): 30700 K PACKAGE REQUIRED: atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,cxxlibs >= 6.0.8-i486-4,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.5-i486-1,gcc >= 4.1.2-i486-1,gconf >= 2.19.1-i586-1vl59,glib2 >= 2.12.13-i486-1,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,libICE >= 1.0.4-i486-1,libSM >= 1.0.3-i486-1,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXft >= 2.1.12-i486-2,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libXt >= 1.0.5-i486-1,libpng >= 1.2.21-i486-1,libxcb >= 1.0-i486-2,libxml2 >= 2.6.28-i486-1,orbit2 >= 2.14.8-i586-1vl59,pango >= 1.16.4-i486-1,procps >= 3.2.7-i486-2,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: thunderbird: thunderbird (Mozilla Thunderbird mail application) thunderbird: thunderbird: Mozilla Thunderbird is a redesign of the Mozilla mail component thunderbird: written using the XUL user interface language. Thunderbird makes thunderbird: emailing safer, faster, and easier than ever before with the thunderbird: industry's best implementations of features such as intelligent spam thunderbird: filters, built-in RSS reader, quick search, and much more. thunderbird: thunderbird: License: MPL 1.1/GPL 2.0/LGPL 2.1 thunderbird: Author: Initial Developer - Netscape Communications Corporation thunderbird: Website: Website: http://www.mozilla.org/projects/thunderbird/ PACKAGE NAME: transmission-1.21-i586-1vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 397 K PACKAGE SIZE (uncompressed): 2110 K PACKAGE REQUIRED: atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,curl >= 7.17.0-i586-1vl59,cyrus-sasl >= 2.1.22-i486-1,dbus >= 1.0.2-i486-3,dbus-glib >= 0.74-i486-1,expat >= 2.0.1-i486-1,fbopenssl >= 0.0.4-i586-1vl59,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.5-i486-1,glib2 >= 2.12.13-i486-1,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libidn >= 0.6.10-i486-1,libpng >= 1.2.21-i486-1,libssh2 >= 0.17-i586-1vl59,libxcb >= 1.0-i486-2,openldap-client >= 2.3.32-i486-1,openssl >= 0.9.8f-i486-1 | openssl-solibs >= 0.9.8f-i486-1,pango >= 1.16.4-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: transmission: transmission (Transmission BitTorrent Client) transmission: transmission: A fast and easy BitTorrent client transmission: transmission: transmission: transmission: transmission: transmission: License: MIT transmission: Authors: Eric Petit And many others. See docs. transmission: Website: http://www.transmissionbt.com/ PACKAGE NAME: wicd-1.5.9-i586-1vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 232 K PACKAGE SIZE (uncompressed): 1150 K PACKAGE REQUIRED: dbus-python >= 0.82.4-i586-1vl59,python >= 2.5.1-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wicd: wicd (network manager for linux) wicd: wicd: wicd is a wired and wireless network manager for Linux. wicd: Some features include: wicd: - Ability to connect to wired and wireless networks wicd: - Profiles for each wireless network and wired network wicd: - Many encryption schemes, some of which include WEP/WPA/WPA2 wicd: - Compatible with wireless-tools wicd: wicd: Homepage: http://wicd.sourceforge.net PACKAGE NAME: wifi-radar-1.9.9-i586-3vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 42 K PACKAGE SIZE (uncompressed): 180 K PACKAGE REQUIRED: pycairo >= 1.4.0-i586-1vl59,pygobject >= 2.14.0-i586-2vl59,pygtk >= 2.10.6-i586-1vl59,python >= 2.5.1-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wifi-radar: wifi-radar (utility for managing WiFi profiles) wifi-radar: wifi-radar: WiFi Radar is a Python/PyGTK2 utility for managing WiFi profiles. wifi-radar: It enables you to scan for available networks and create profiles wifi-radar: for your preferred networks. At boot time, running WiFi Radar wifi-radar: will automatically scan for an available preferred network and wifi-radar: connect to it. wifi-radar: License: GNU General Public License, version 2 wifi-radar: Authors: Brian Elliott Finley wifi-radar: Ahmad Baitalmal wifi-radar: Website: http://wifi-radar.systemimager.org/ PACKAGE NAME: wireshark-1.0.8-i586-1vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 8092 K PACKAGE SIZE (uncompressed): 40110 K PACKAGE REQUIRED: atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.8-i586-1vl59,glib2 >= 2.12.12-i486-1,glibc-solibs >= 2.5-i486-5,gnutls >= 2.6.1-i486-1_slack12.0,gtk+2 >= 2.10.14-i486-1,heimdal >= 1.0.1-i586-2vl59,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libgcrypt >= 1.2.4-i486-1,libgpg-error >= 1.5-i486-1,libpng >= 1.2.29-i586-1vl59,libxcb >= 1.0-i486-2,openssl >= 0.9.8h-i486-2_slack12.0 | openssl-solibs >= 0.9.8h-i486-2_slack12.0,pango >= 1.16.4-i486-1,pcre >= 7.7-i486-1_slack12.0,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: wireshark: wireshark (a powerful network protocol analyzer) wireshark: wireshark: wireshark is a cross-platform, powerful and flexible network protocol wireshark: analyzer. It provides live packet capture as well as offline wireshark: analysis wireshark: wireshark: wireshark: License: GPL wireshark: Authors: Gerald Combs & others wireshark: Website: http://www.wireshark.org/ PACKAGE NAME: xchat-2.8.6-i586-1vl59.tlz PACKAGE LOCATION: ./net PACKAGE SIZE (compressed): 1501 K PACKAGE SIZE (uncompressed): 5800 K PACKAGE REQUIRED: atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,dbus >= 1.0.2-i486-3,dbus-glib >= 0.74-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.7-i586-1vl59,glib2 >= 2.12.13-i486-1,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libpng >= 1.2.29-i586-1vl59,libxcb >= 1.0-i486-2,openssl >= 0.9.8g-i486-2 | openssl-solibs >= 0.9.8g-i486-2,pango >= 1.16.4-i486-1,tcl >= 8.4.16-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xchat: xchat (GTK+-based IRC client) xchat: xchat: XChat is an IRC chat program for both Linux and Windows. xchat: It allows you to join multiple IRC channels (chat rooms) at xchat: the same time, talk publicly, private one-on-one conversations xchat: etc. Even file transfers are possible. xchat: xchat: xchat: License: GPL xchat: Authors: Peter Železný (zed@xchat.org) xchat: Website: http://www.xchat.org PACKAGE NAME: abiword-2.6.2-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 2250 K PACKAGE SIZE (uncompressed): 11760 K PACKAGE REQUIRED: atk >= 1.18.0-i486-1,bzip2 >= 1.0.4-i486-1,cairo >= 1.4.10-i486-1,cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,enchant >= 1.3.0-i586-2vl59,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.5-i486-1,fribidi >= 0.10.7-i486-2,gcc >= 4.1.2-i486-1,glib2 >= 2.12.13-i486-1,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,gucharmap >= 1.10.0-i486-1,libICE >= 1.0.4-i486-1,libSM >= 1.0.3-i486-1,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXft >= 2.1.12-i486-2,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libart_lgpl >= 2.3.19-i486-1,libglade >= 2.6.1-i486-1,libgnomecanvas >= 2.9.2-i586-1vl59,libgnomeprint >= 2.18.1-i586-1vl59,libgnomeprintui >= 2.18.0-i586-1vl59,libgsf >= 1.14.7-i586-2vl59,libjpeg >= 6b-i486-5,libpng >= 1.2.21-i486-1,libwmf >= 0.2.8.4-i486-3,libxcb >= 1.0-i486-2,libxml2 >= 2.6.28-i486-1,pango >= 1.16.4-i486-1,popt >= 1.7-i486-2,wv >= 1.2.4-i586-1vl59,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: abiword: abiword (word processor) abiword: abiword: AbiWord is a free word processing program similar to Microsoft Word. abiword: It is suitable for a wide variety of word processing tasks. AbiWord abiword: is rapidly becoming a state of the art Word Processor, with lots of abiword: features useful for your daily work, personal needs, or for just abiword: some good old typing fun. Developed by AbiWord Team. abiword: abiword: License: GNU GPL abiword: Authors: http://www.abisource.com/help/en-US/credits.html abiword: Website: http://www.abisource.com/ PACKAGE NAME: abiword-plugins-2.6.2-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 636 K PACKAGE SIZE (uncompressed): 2730 K PACKAGE REQUIRED: aiksaurus >= 1.2.1-i586-2vl59,atk >= 1.18.0-i486-1,bzip2 >= 1.0.4-i486-1,cairo >= 1.4.10-i486-1,cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.5-i486-1,fribidi >= 0.10.7-i486-2,gcc >= 4.1.2-i486-1,glib2 >= 2.12.13-i486-1,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,gtkmathview >= 0.7.8-i586-2vl59,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXft >= 2.1.12-i486-2,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libart_lgpl >= 2.3.19-i486-1,libglade >= 2.6.1-i486-1,libgnomeprint >= 2.18.1-i586-1vl59,libgsf >= 1.14.7-i586-2vl59,libjpeg >= 6b-i486-5,libpng >= 1.2.21-i486-1,librsvg >= 2.16.1-i486-1,libtermcap >= 1.2.3-i486-7,libwmf >= 0.2.8.4-i486-3,libwpd >= 0.8.9-i486-1,libxcb >= 1.0-i486-2,libxml2 >= 2.6.28-i486-1,link-grammar >= 4.2.4-i586-2vl59,ots >= 0.5.0-i586-3vl59,pango >= 1.16.4-i486-1,psiconv >= 0.9.8-i586-3vl59,readline >= 5.2-i486-2,t1lib >= 5.1.0-i486-3,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: abiword-plugins: abiword-plugins (plugins for abiword 2.6.2) abiword-plugins: abiword-plugins: abiword-plugins: abiword-plugins: plugins for abiword 2.6.2 abiword-plugins: abiword-plugins: developed by abiword team(see webpage below) abiword-plugins: abiword-plugins: License: GNU GPL abiword-plugins: Authors: www.abisource.com/help/en-US/credits.html abiword-plugins: Website: www.abisource.com PACKAGE NAME: catfish-0.3.1-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 33 K PACKAGE SIZE (uncompressed): 160 K PACKAGE REQUIRED: libglade >= 2.6.1-i486-1,pygtk >= 2.10.6-i586-1vl59 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: catfish: catfish (File searching tool) catfish: Catfish is a frontend for different search engines. The interface is catfish: intentionally lightweight and simple, using only GTK+ 2. You can catfish: configure it to your needs by using several command line options. catfish: catfish: Supported backends are find, (s)locate, doodle, tracker, beagle, catfish: strigi and pinot (dbus is required for strigi and pinot). catfish: catfish: License: GNU GPL catfish: Authors: Christian Dywan catfish: Website: http://software.twotoasts.de/ PACKAGE NAME: gimp-2.4.7-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 8790 K PACKAGE SIZE (uncompressed): 47610 K PACKAGE REQUIRED: gtk+2 >= 2.10.14,atk >= 1.18.0,pango >= 1.16.4,cairo >= 1.4.10,glib2 >= 2.12.13,libSM >= 1.0.3,libICE >= 1.0.4,libX11 >= 1.1.3,libXmu >= 1.0.3,libXt >= 1.0.5,libXfixes >= 4.0.3,fontconfig >= 2.4.2,libXext >= 1.0.3,libXrender >= 0.9.4,libXinerama >= 1.0.2,libXi >= 1.1.3,libXrandr >= 1.2.2,libXcursor >= 1.1.9,freetype >= 2.3.7,zlib >= 1.2.3,libpng >= 1.2.29,libxcb >= 1.0,expat >= 2.0.1,libXau >= 1.0.3,libXdmcp >= 1.0.2,libart_lgpl >= 2.3.19,bash >= 3.1.017,dbus-glib >= 0.74,lcms >= 1.16,hal >= 0.5.10,libusb >= 0.1.12,alsa-lib >= 1.0.17,aalib >= 1.4rc5,slang >= 2.0.7,gpm >= 1.20.1,libmng >= 1.0.9,librsvg >= 2.16.1,libgsf >= 1.14.7,libxml2 >= 2.6.28,gnome-vfs >= 2.18.1,gconf >= 2.19.1,orbit2 >= 2.14.8,libwmf >= 0.2.8.4,libXpm >= 3.5.7,libexif >= 0.6.16,python >= 2.5.2,libtiff >= 3.8.2,poppler >= 0.6.2,cxxlibs >= 6.0.8,gcc >= 4.1.2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gimp: gimp (The GNU Image Manipulation Program) gimp: gimp: The GIMP is a powerful tool for the preparation and manipulation of gimp: digital images. The GIMP provides the user with a wide variety of gimp: image manipulation, painting, processing, and rendering tools. The gimp: GIMP's open design and extensible architecture make for a very gimp: powerful end product for photo and image retouching, web graphics gimp: design, or digital illustration. gimp: gimp: gimp: PACKAGE NAME: gphoto2-2.4.4-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 163 K PACKAGE SIZE (uncompressed): 800 K PACKAGE REQUIRED: aalib >= 1.4rc5-i486-2,glibc-solibs >= 2.5-i486-5,gpm >= 1.20.1-i486-4,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXdmcp >= 1.0.2-i486-1,libexif >= 0.6.16-i486-1,libgphoto2 >= 2.4.4-i586-1vl59,libjpeg >= 6b-i486-5,libtool >= 1.5.24-i486-1,libusb >= 0.1.12-i486-2,libxcb >= 1.0-i486-2,ncurses >= 5.6-i486-2,popt >= 1.7-i486-2,readline >= 5.2-i486-2,slang >= 2.0.7-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gphoto2: gphoto2 (a digital camera access application) gphoto2: gphoto2: gPhoto2 is a free, redistributable, ready to use set of digital gphoto2: camera software applications for Unix-like systems, written by a gphoto2: team of dedicated volunteers around the world, supporting more gphoto2: than 600 cameras gphoto2: gphoto2: gphoto2: License: LGPL gphoto2: Authors: Scott Fritzinger & others gphoto2: Website: http://www.gphoto.com/ PACKAGE NAME: gphoto2-2.4.5-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 163 K PACKAGE SIZE (uncompressed): 800 K PACKAGE REQUIRED: aalib >= 1.4rc5-i486-2,glibc-solibs >= 2.5-i486-5,gpm >= 1.20.1-i486-4,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXdmcp >= 1.0.2-i486-1,libexif >= 0.6.16-i486-1,libgphoto2 >= 2.4.5-i586-1vl59,libjpeg >= 6b-i486-5,libtool >= 1.5.24-i486-1,libusb >= 0.1.12-i486-2,libxcb >= 1.0-i486-2,ncurses >= 5.6-i486-2,popt >= 1.7-i486-2,readline >= 5.2-i486-2,slang >= 2.0.7-i486-1 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gphoto2: gphoto2 (a digital camera access application) gphoto2: gphoto2: gPhoto2 is a free, redistributable, ready to use set of digital gphoto2: camera software applications for Unix-like systems, written by a gphoto2: team of dedicated volunteers around the world, supporting more gphoto2: than 600 cameras gphoto2: gphoto2: gphoto2: License: LGPL gphoto2: Authors: Scott Fritzinger & others gphoto2: Website: http://www.gphoto.com/ PACKAGE NAME: gtkam-0.1.16-i586-2vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 473 K PACKAGE SIZE (uncompressed): 1170 K PACKAGE REQUIRED: atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.7-i586-1vl59,gimp >= 2.4.7-i586-1vl59,glib2 >= 2.12.12-i486-1,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,libexif >= 0.6.16-i486-1,libexif-gtk >= 0.3.5-i586-2vl59,libgphoto2 >= 2.4.3-i586-1vl59,libpng >= 1.2.29-i586-1vl59,libtool >= 1.5.24-i486-1,libusb >= 0.1.12-i486-2,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libxcb >= 1.0-i486-2,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,pango >= 1.16.4-i486-1,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtkam: gtkam (a graphical interface to libgphoto2) gtkam: gtkam: gtkam provides a gtk-based GUI interface to gphoto2/libgphoto2. This gtkam: package allows viewing of thumnails and saving of photos from any gtkam: digital camera supported by gphoto2 gtkam: gtkam: gtkam: gtkam: License: LGPL gtkam: Authors: Scott Fritzinger & others gtkam: Website: http://www.gphoto.org PACKAGE NAME: gtkmathview-0.8.0-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 978 K PACKAGE SIZE (uncompressed): 8230 K PACKAGE REQUIRED: atk >= 1.18.0-i486-1,cairo >= 1.4.10-i486-1,cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.7-i586-1vl59,gcc >= 4.1.2-i486-1,glib2 >= 2.12.13-i486-1,glibc-solibs >= 2.5-i486-5,gtk+2 >= 2.10.14-i486-1,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libpng >= 1.2.29-i586-1vl59,libxcb >= 1.0-i486-2,libxml2 >= 2.6.28-i486-1,pango >= 1.16.4-i486-1,popt >= 1.7-i486-2,t1lib >= 5.1.0-i486-3,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: gtkmathview: gtkmathview (C++ rendering engine for MathML documents) gtkmathview: gtkmathview: GtkMathView is a C++ rendering engine for MathML gtkmathview: documents. It provides an interactive view that can be gtkmathview: used for browsing and editing MathML markup. gtkmathview: gtkmathview: gtkmathview: gtkmathview: License: GNU Library General Public License (LGPL), Version 3 gtkmathview: Authors: Luca Padovani & others (see AUTHORS file) gtkmathview: Website: http://helm.cs.unibo.it/mml-widget/ PACKAGE NAME: link-grammar-4.3.8-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 590 K PACKAGE SIZE (uncompressed): 2300 K PACKAGE REQUIRED: glibc-solibs >= 2.5-i486-5 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: link-grammar: link-grammar (syntactic parser of English grammar) link-grammar: link-grammar: The Link Grammar Parser is a syntactic parser of English, link-grammar: based on link grammar, an original theory of English syntax. link-grammar: Given a sentence, the system assigns to it a syntactic link-grammar: structure, which consists of a set of labeled links link-grammar: connecting pairs of words. link-grammar: link-grammar: License: see LICENSE file link-grammar: Authors: Davy Temperley, John Lafferty and Daniel Sleator link-grammar: Website: http://www.abisource.com/projects/link-grammar/ PACKAGE NAME: opera-9.52-i386-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 5844 K PACKAGE SIZE (uncompressed): 19390 K PACKAGE REQUIRED: bash >= 3.1.017,libX11 >= 1.1.3,libXext >= 1.0.3,libSM >= 1.0.3,libICE >= 1.0.4,zlib >= 1.2.3,cxxlibs >= 6.0.8,gcc >= 4.1.2,libmng >= 1.0.9,libjpeg >= 6b,libpng >= 1.2.29,mesa >= 7.0.2,libXmu >= 1.0.3,libXi >= 1.1.3,libXrender >= 0.9.4,libXrandr >= 1.2.2,libXcursor >= 1.1.9,libXinerama >= 1.0.2,libXft >= 2.1.12,freetype >= 2.3.7,fontconfig >= 2.4.2,libxcb >= 1.0,libXau >= 1.0.3,lcms >= 1.16,libXt >= 1.0.5,libXfixes >= 4.0.3,expat >= 2.0.1,libXdmcp >= 1.0.2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: opera-en: Opera (The fastest browser in the world) opera-en: opera-en: The most full-featured Internet power tool on the market, Opera opera-en: includes pop-up blocking, tabbed browsing, integrated searches opera-en: E-mail, RSS Newsfeeds and IRC chat. opera-en: opera-en: opera-en: http://vectorlinux.com opera-en: opera-en: opera-en: Packager Vector PACKAGE NAME: sane-1.0.19-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 2179 K PACKAGE SIZE (uncompressed): 9970 K PACKAGE REQUIRED: gtk+2 >= 2.10.14,atk >= 1.18.0,pango >= 1.16.4,cairo >= 1.4.10,glib2 >= 2.12.13,libusb >= 0.1.12,libjpeg >= 6b,libtiff >= 3.8.2,libieee1284 >= 0.2.10,libgphoto2 >= 2.4.2,libexif >= 0.6.16,libX11 >= 1.1.3,libXfixes >= 4.0.3,fontconfig >= 2.4.2,libXext >= 1.0.3,libXrender >= 0.9.4,libXinerama >= 1.0.2,libXi >= 1.1.3,libXrandr >= 1.2.2,libXcursor >= 1.1.9,freetype >= 2.3.7,zlib >= 1.2.3,libpng >= 1.2.29,libtool >= 1.5.24,libxcb >= 1.0,expat >= 2.0.1,libXau >= 1.0.3,libXdmcp >= 1.0.2,bash >= 3.1.017,gimp >= 2.4.6 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: sane: sane (Scanner Access Now Easy) sane: sane: SANE is a universal scanner interface that provides standardized sane: access to any raster image scanner hardware, such as flatbed scanners, sane: hand-held scanners, video and still cameras, frame-grabbers, and other sane: similar devices. sane: sane: sane: sane: sane: PACKAGE NAME: scribus-1.3.3.11-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 8632 K PACKAGE SIZE (uncompressed): 29700 K PACKAGE REQUIRED: cups >= 1.3.6-i586-2vl59,cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,expat >= 2.0.1-i486-1,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.5-i486-1,gcc >= 4.1.2-i486-1,glibc-solibs >= 2.5-i486-5,lcms >= 1.16-i486-1,libICE >= 1.0.4-i486-1,libSM >= 1.0.3-i486-1,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXcursor >= 1.1.9-i486-1,libXdamage >= 1.1.1-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXft >= 2.1.12-i486-2,libXi >= 1.1.3-i486-1,libXinerama >= 1.0.2-i486-1,libXmu >= 1.0.3-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libXt >= 1.0.5-i486-1,libXxf86vm >= 1.0.1-i486-1,libart_lgpl >= 2.3.19-i486-1,libdrm >= 2.3.0-i486-1,libjpeg >= 6b-i486-5,libmng >= 1.0.9-i486-1,libpng >= 1.2.27-i586-1vl59,libtiff >= 3.8.2-i486-3,libxcb >= 1.0-i486-2,libxml2 >= 2.6.28-i486-1,mesa >= 7.0.2-i486-1,openssl >= 0.9.8f-i486-1 | openssl-solibs >= 0.9.8f-i486-1,python >= 2.5.1-i486-1,qt >= 3.3.8b-i586-3vl59,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: scribus: scribus (scribus-1.3.3.11) scribus: Scribus is an open-source program that brings award- scribus: winning professional page layout to Linux/ scribus: scribus: scribus: scribus: scribus: scribus: License: GPL scribus: Authors: scribus team scribus: Website: http://www.scribus.net/ PACKAGE NAME: vasmCC-1.0.12-i586-2vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 412 K PACKAGE SIZE (uncompressed): 620 K PACKAGE REQUIRED: gambas2-runtime >= 2.0.0 | gambas2 >= 2.0.0,vasm >= 5.9 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vasmCC: vasm Control Center A GUI frontend to vasm vasmCC: vasmCC: GUI front end to vasm written in gambas2 vasmCC: vasmCC: LICENSE: GNU GPL v2 vasmCC: WEBSITE: http://vasmcc.googlecode.com vasmCC: AUTHOR: M0E-lnx PACKAGE NAME: vl-hot-config-1.9.21-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 13 K PACKAGE SIZE (uncompressed): 50 K PACKAGE REQUIRED: vl-hot >= 1.9.20,qt >= 3.3.5,gksu | kdesu PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vl-hot-config: vl-hot-config (vl-hot configuration GUI) vl-hot-config: vl-hot-config: vl-hot-config is a configuration GUI for the vl-hot udev-based vl-hot-config: external mass storage device automounting system. vl-hot-config: vl-hot-config: vl-hot-config: vl-hot-config: vl-hot-config: Joe1962 vl-hot-config: GNU LIBRARY GENERAL PUBLIC LICENSE, Version 2, June 1991 vl-hot-config: PACKAGE NAME: xarchiver-0.4.9svn-i586-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 305 K PACKAGE SIZE (uncompressed): 1080 K PACKAGE REQUIRED: gtk+2 >= 2.10.14,atk >= 1.18.0,pango >= 1.16.4,cairo >= 1.4.10,fontconfig >= 2.4.2,freetype >= 2.3.5,zlib >= 1.2.3,expat >= 2.0.1,libpng >= 1.2.21,libXrender >= 0.9.4,libX11 >= 1.1.3,libxcb >= 1.0,libXau >= 1.0.3,libXdmcp >= 1.0.2,glib2 >= 2.12.13,libXfixes >= 4.0.3,libXext >= 1.0.3,libXinerama >= 1.0.2,libXi >= 1.1.3,libXrandr >= 1.2.2,libXcursor >= 1.1.9,bash >= 3.1.017 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xarchiver: Xarchiver (Archive Manager) xarchiver: xarchiver: Xarchiver is a Desktop Environment independent archiver xarchiver: frontend. All common archive types are supported. RPM and xarchiver: ISO are handled without rpm or isodump executables. To run xarchiver: it you only need GTK+2 libraries and obviously the various xarchiver: rar, arj and 7z for these archives types. All the others xarchiver: archivers are installed by default in most distro. xarchiver: xarchiver: Homepage: http://xarchiver.xfce.org/ xarchiver: PACKAGE NAME: xine-lib-1.1.16.2-i686-1vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 2830 K PACKAGE SIZE (uncompressed): 7730 K PACKAGE REQUIRED: ImageMagick >= 6.3.5_8-i586-2vl59,a52dec >= 0.7.4-i586-2vl59,aalib >= 1.4rc5-i486-2,alsa-lib >= 1.0.17-i586-1vl59,audiofile >= 0.2.6-i486-2,bzip2 >= 1.0.5-i486-1_slack12.0,cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,cyrus-sasl >= 2.1.22-i486-1,dbus >= 1.0.2-i486-3,dbus-glib >= 0.74-i486-1,esound >= 0.2.38-i486-1,expat >= 2.0.1-i486-1,faac >= 1.25-i586-2vl59,faad2 >= 2.5-i586-2vl59,ffmpeg >= 20070917-i586-2vl59,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.8-i586-1vl59,gcc >= 4.1.2-i486-1,gconf >= 2.19.1-i586-1vl59,glib2 >= 2.12.12-i486-1,glibc-solibs >= 2.5-i486-5,gnome-vfs >= 2.18.1-i586-1vl59,gpm >= 1.20.1-i486-4,gtk+2 >= 2.10.14-i486-1,lame >= 3.97-i586-1vl60,lcms >= 1.16-i486-1,libICE >= 1.0.4-i486-1,libSM >= 1.0.3-i486-1,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXdamage >= 1.1.1-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXfixes >= 4.0.3-i486-1,libXinerama >= 1.0.2-i486-1,libXrandr >= 1.2.2-i486-1,libXrender >= 0.9.4-i486-1,libXt >= 1.0.5-i486-1,libXv >= 1.0.3-i486-1,libXvMC >= 1.0.4-i486-1,libXxf86vm >= 1.0.1-i486-1,libdc1394 >= 1.2.2-i586-2vl59,libdrm >= 2.3.0-i486-1,libgsm >= 1.0.10_13-i586-2vl59,libjpeg >= 6b-i486-5,libmng >= 1.0.9-i486-1,libogg >= 1.1.3-i486-2,libraw1394 >= 1.2.1-i586-2vl59,libtheora >= 1.0beta1-i486-1,libtiff >= 3.8.2-i486-3,libvorbis >= 1.2.0-i486-1,libxcb >= 1.0-i486-2,libxml2 >= 2.6.32-i486-1_slack12.0,mesa >= 7.0.2-i486-1,openldap-client >= 2.3.32-i486-1,openssl >= 0.9.8h-i486-2_slack12.0 | openssl-solibs >= 0.9.8h-i486-2_slack12.0,orbit2-2.14.8-1vl59 >= | orbit2 >= 2.14.8-i586-1vl59,samba >= 3.0.33-i486-1_slack12.0,samba >= 3.0.33-i486-1_slack12.0 | util-linux >= 2.12r-i486-6,sdl >= 1.2.11-i486-3,slang >= 2.0.7-i486-1,svgalib >= 1.9.25-i486-1,x264 >= 20070917-i586-2vl59,xvidcore >= 1.1.3-i586-2vl59,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xine-lib: xine-lib (a high quality multi-media plaback library) xine-lib: xine-lib: xine-lib is a free, high-performance multimedia playback engine. The xine-lib: xine share libraries are used by xine-ui and a number of other front xine-lib: end pckages to provide high quality video and audio playback from xine-lib: source including DVDs, VCDs and streaming sources xine-lib: xine-lib: xine-lib: License: GPL xine-lib: Authors: Siegfried Langauf & others xine-lib: Website: http://xinehq.de/ PACKAGE NAME: xine-ui-0.99.5-i586-3vl59.tlz PACKAGE LOCATION: ./x-apps PACKAGE SIZE (compressed): 1246 K PACKAGE SIZE (uncompressed): 2890 K PACKAGE REQUIRED: curl >= 7.17.0-i586-1vl59,cxxlibs >= 6.0.8-i486-4 | gcc-g++ >= 4.1.2-i486-1,cyrus-sasl >= 2.1.22-i486-1,expat >= 2.0.1-i486-1,fbopenssl >= 0.0.4-i586-1vl59,fontconfig >= 2.4.2-i486-2,freetype >= 2.3.5-i486-1,gcc >= 4.1.2-i486-1,glibc-solibs >= 2.5-i486-5,libX11 >= 1.1.3-i486-1,libXau >= 1.0.3-i486-1,libXdmcp >= 1.0.2-i486-1,libXext >= 1.0.3-i486-1,libXft >= 2.1.12-i486-2,libXinerama >= 1.0.2-i486-1,libXrender >= 0.9.4-i486-1,libXtst >= 1.0.3-i486-1,libXv >= 1.0.3-i486-1,libXxf86vm >= 1.0.1-i486-1,libcaca >= 0.99.beta11-i486-1,libidn >= 0.6.10-i486-1,libpng >= 1.2.21-i486-1,libssh2 >= 0.17-i586-1vl59,libxcb >= 1.0-i486-2,ncurses >= 5.6-i486-2,openldap-client >= 2.3.32-i486-1,openssl >= 0.9.8f-i486-1 | openssl-solibs >= 0.9.8f-i486-1,readline >= 5.2-i486-2,slang >= 2.0.7-i486-1,xine-lib >= 1.1.10-i586-1vl59,zlib >= 1.2.3-i486-2 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: xine-ui: xine-ui (xine multimedia playback engine user interface) xine-ui: xine-ui: Xine is a free multimedia player. It plays back CDs, DVDs, and VCDs, xine-ui: multimedia files, and multimedia streamed over a network. xine-ui: xine-ui: The xine-ui package contains the graphical user interface for the xine-ui: xine multimedia player. xine-ui: xine-ui: License: GPL xine-ui: Authors: Many, see docs xine-ui: Website: http://www.xinehq.de/ xine-ui: PACKAGE NAME: vpackager-1.0.11-i586-1vl59.tlz PACKAGE LOCATION: ./x-dev PACKAGE SIZE (compressed): 225 K PACKAGE SIZE (uncompressed): 400 K PACKAGE REQUIRED: pkgtools-tukaani >= 1.2_rc1,cmake >= 2.4.6 ,python >= 2.4.3,requiredbuilder >= 0.14.7,cruxports4slack >= 1.0,gambas2-runtime >= 2.5.0,subversion >= 1.4.4,git >= 1.5.2.2,libffi >= 3.0.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: vpackager: vpackager ( Vector Linux Package Creator ) vpackager: vpackager: vpackager is a tool written in gambas2 to build packages from vpackager: source. It will build most type of ordinary software including vpackager: CMake and python applications. Includes a slack-desc writer tool vpackager: and a package installer. The cruxports4slack GUI offers all the vpackager: functionality of the cruxports4slack cli tools plus a level of vpackager: dependancy control. vpackager: vpackager: Author: Moises Henriquez (M0E.lnx@gmail.com) vpackager: Web Page: http://vpackager.googlecode.com vpackager: License: GNU GPL v3 PACKAGE NAME: fontfix-1.0-noarch-2vl59.tlz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 3 K PACKAGE SIZE (uncompressed): 20 K PACKAGE REQUIRED: PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: fontfix: fontfix (Enable all installed fonts in Vector Linux 5.9) fontfix: fontfix: A bug in Vector Linux 5.9 results in a large number of fonts included fontfix: with X.org installed but disabled on a vanilla system. This package fontfix: installs a new /etc/fonts/conf.aval/51-local.conf file which adds fontfix: all the disabled font directories to the font path. It also enables fontfix: subpixel rendering required by some optional Type1 font packages. fontfix: The font cache is rebuilt and fonts are immediately enabled. fontfix: License: GNU Library General Public License (LGPL) fontfix: Sub-pixel rendering code: Maxim Iorsh fontfix: Author: Caitlyn Martin PACKAGE NAME: x11-7.3-i586-1vl59.tlz PACKAGE LOCATION: ./x PACKAGE SIZE (compressed): 0 K PACKAGE SIZE (uncompressed): 10 K PACKAGE REQUIRED: xorg-server >= 1.4 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: x11: fake empty package for backwards compatability PACKAGE NAME: icon-naming-utils-0.8.6-i586-1vl59.tlz PACKAGE LOCATION: ./xfce PACKAGE SIZE (compressed): 22 K PACKAGE SIZE (uncompressed): 120 K PACKAGE REQUIRED: perl >= 5.8.8-i486-4,perl-XML-Simple >= 2.18-i586-1vl59 | perl-XML-Writer >= 2.18-i586-1vl59 PACKAGE CONFLICTS: PACKAGE SUGGESTS: PACKAGE DESCRIPTION: icon-naming-utils: icon-naming-utils (tool for mapping icon names.) icon-naming-utils: icon-naming-utils: Utilities for mapping legacy GNOME and KDE icon names to the new Icon icon-naming-utils: Naming Specification. icon-naming-utils: icon-naming-utils: icon-naming-utils: icon-naming-utils: icon-naming-utils: License: GPL 2.0 icon-naming-utils: Authors: Rodney Dawes icon-naming-utils: Website: http://tango.freedesktop.org