<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">%%% ====================================================================
%%%  @LaTeX-style-file{
%%%     author          = "David Carlisle",
%%%     version         = "5.01",
%%%     date            = "20 July 1993",
%%%     time            = "10:57:34 BST",
%%%     filename        = "xr.sty",
%%%     address         = "Computer Science Department
%%%                        Manchester University
%%%                        Oxford Road
%%%                        Manchester
%%%                        England
%%%                        M13 9PL",
%%%     telephone       = "+44 61 275 6139",
%%%     FAX             = "+44 61 275 6236",
%%%     checksum        = "04455 207 971 7348",
%%%     email           = "carlisle@cs.man.ac.uk (Internet)",
%%%     codetable       = "ISO/ASCII",
%%%     keywords        = "LaTeX, \ref, \pageref, \label",
%%%     supported       = "yes",
%%%     docstring       = "
%%%
%%%     xr.sty
%%%
%%%     A style which allows the use \[page]ref in one file to access
%%%     labels defined by \label in another document.
%%%     Each such file which is to be cross referenced is declared with
%%%     the \externaldocument command.
%%%
%%%     Versions 1-4 of this style were written by Jean-Pierre Drucbert
%%%
%%%     Version 5 re-implements the main mechanism, and adds an
%%%     optional argument to allow the user to resolve conflicts if two
%%%     files use the same \label.
%%%
%%%     The checksum field above was produced by
%%%     Robert Solovay's checksum utility.",
%%%  }
%%% ====================================================================
%
% Version 5.00 07 July 1993
%  New mechanism (\read instead of \input).
%
% Version 5.01 20 July 1993
%  V5.00 did not import aux files of \include'ed files. (Reported by
%  Jean-Pierre Drucbert.)
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%&lt;*x&gt;
% This file may be used without modification as a style (.sty) file.
%
% If you have Mittelbach's doc.sty, this file may be formatted with a
% command like:
%                latex xr.sty
%
% If you have the Mittelbach/Duchier/Braams docstrip utility, you may
% produce a faster loading .sty file. Rename this file to: xr.doc
% Then run this file through *plain* TeX:
%                tex xr.doc
% This should produce the file xr.sty.
% If you do not have plain TeX on your system, you can trick LaTeX into
% doing the work as follows:
%                latex \def\fmtname{plain} \input xr.doc
% Note that you may need to quote the arguments here to stop your
% operating system treating the \ characters incorrectly.
%
%                latex xr.doc
% Will produce a typeset version of the documentation, as above.
%
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\def\plain{plain}\ifx\fmtname\plain\csname fi\endcsname
     \def\batchfile{xr.doc}
     \input docstrip
     \preamble

     Do not distribute the stripped version of this file.
     The checksum in the header refers to the documented version.

     \endpreamble
     \generateFile{xr.sty}{t}{\from{xr.doc}{}}
     \endinput
\fi
%
\ifcat a\noexpand @\let\next\relax\else\def\next{%
    \documentstyle[doc]{article}\MakePercentIgnore}\fi\next
%
%\def\eatmodule&lt;#1&gt;{}\eatmodule
%&lt;/x&gt;
% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%
% \textwidth=355pt   ^^A Allow macrocode text with 72 columns.
% \CodelineIndex     ^^A Code lines numbered.
% \DisableCrossrefs  ^^A No Cross references.
% \MakeShortVerb{\"} ^^A "\foo" works like \verb+\foo+
%
% \title{xr.sty}
% \author{D. P. Carlisle^^A
% \thanks{The Author of Versions 1--4 was Jean-Pierre Drucbert}}
% \date{20 July 1993}
%
% \begin{document}
% \maketitle
%
% This style implements a system for eXternal References.
%
% If one document needs to refer to sections of another, say "aaa.tex",
% then this style may be given as a "\documentstyle" option in the main
% file, and the command "\externaldocument{aaa}" given in the preamble.
%
% Then you may use "\ref" and "\pageref" to refer to anything which has
% been given a "\label" in either "aaa.tex" or the main document.
% You may declare any number of such external documents.
%
% If any of the external documents, or the main document, use the same
% "\label" then an error will occur as the label will be multiply
% defined. To overcome this problem "\externaldocument" has an optional
% argument. If you declare "\externaldocument[A-]{aaa}" Then all
% references from "aaa" are prefixed by "A-". So for instance, if a
% section of "aaa" had "\label{intro}", then this could be referenced
% with "\ref{A-intro}". The prefix need not be "A-", it can be any
% string chosen to ensure that all the labels imported from external
% files are unique. Note however that if your style declares certain
% active characters (":" in French, \verb|"| in German) then these
% characters can not usually be used in "\label", and similarly may not
% be used in the optional argument to "\externaldocument".
%
% \typeout{End of the Introduction and Examples.}
% \typein[\answer]%
%   {Do you want an annotated listing of the macro definitions (y/n) ?}
% \def\next{y}\ifx\answer\next\else\expandafter\stop\fi
%
% \section{The macros}
% Check for the optional argument.
%    \begin{macrocode}
\def\externaldocument{\@ifnextchar[{\XR@}{\XR@[]}}
%    \end{macrocode}
%
% Save the optional prefix. Start processing the first "aux" file.
%    \begin{macrocode}
\def\XR@[#1]#2{{%
  \makeatletter
  \def\XR@prefix{#1}%
  \XR@next#2.aux\relax\\}}
%    \end{macrocode}
%
% Process the next "aux" file in the list and remove it from the head of
% the list of files to process.
%    \begin{macrocode}
\def\XR@next#1\relax#2\\{%
  \edef\XR@list{#2}%
  \XR@loop{#1}}
%    \end{macrocode}
%
% Check whether the list of "aux" files is empty.
%    \begin{macrocode}
\def\XR@aux{%
  \ifx\XR@list\@empty\else\expandafter\XR@explist\fi}
%    \end{macrocode}
%

% Expand the list of aux files, and call "\XR@next" to process the first
% one.
%    \begin{macrocode}
\def\XR@explist{\expandafter\XR@next\XR@list\\}
%    \end{macrocode}
%
% If the "aux" file exists, loop through line by line, looking for
% "\newlabel" and "\@input". Otherwise process the next file in the
% list.
%    \begin{macrocode}
\def\XR@loop#1{\openin\@inputcheck#1\relax
  \ifeof\@inputcheck
    \typeout{^^JNo file #1^^JLABELS NOT IMPORTED.^^J}%
    \expandafter\XR@aux
  \else
    \typeout{IMPORTING LABELS FROM #1}%
    \expandafter\XR@read\fi}
%    \end{macrocode}
%
% Read the next line of the aux file.
%    \begin{macrocode}
\def\XR@read{%
  \read\@inputcheck to\XR@line
%    \end{macrocode}
% The "..." make sure that "\XR@test" always has sufficient arguments.
%    \begin{macrocode}
  \expandafter\XR@test\XR@line...\XR@}
%    \end{macrocode}
%
% Look at the first token of the line.
% If it is "\newlabel", do the "\newlabel". If it is "\@input", add the
% filename to the list of files to process. Otherwise ignore.
% Go around the loop if not at end of file. Finally process the next
% file in the list.
%    \begin{macrocode}
\long\def\XR@test#1#2#3#4\XR@{%
  \ifx#1\newlabel
    \newlabel{\XR@prefix#2}{#3}%
  \else\ifx#1\@input
     \edef\XR@list{\XR@list#2\relax}%
  \fi\fi
  \ifeof\@inputcheck\expandafter\XR@aux
  \else\expandafter\XR@read\fi}
%    \end{macrocode}
%
% \end{document}
\endinput
</pre></body></html>