<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">Patch-ID# 110790-06
Keywords: Netra ct OBP PROM Update
Synopsis: Netra ct 1.0: OBP update for SUNW,UltraSPARC-IIi-Netract
Date: Dec/06/2002

Install Requirements: None                      
                      
Solaris Release: 8

SunOS Release: 5.8

Unbundled Product: Netra ct
    NOTE: This utility is *not* OS-dependent.  The list of releases shown
          under the "Solaris Release" and "SunOS Release" sections may not 
          be complete: The absence of a valid Solaris Release or SunOS  
          Release from the lists above does not preclude the installation 
          of this patch against the hardware.

Unbundled Release: 1.0
NOTE: OBP 3.14.7 ct

Xref: 

Topic: 

Relevant Architectures: sparc.sun4u

BugId's fixed with this patch: 4367982 4373084 4389133 4397444 4411063 4466477 4635829 4785285

Changes incorporated in this version: 4785285

Patches accumulated and obsoleted by this patch: 

Patches which conflict with this patch: 

Patches required with this patch: 

Obsoleted by: 

Files included with this patch: 

/usr/platform/SUNW,UltraSPARC-IIi-Netract/OBP/Update.to.3.14.3.ct
/usr/platform/SUNW,UltraSPARC-IIi-Netract/OBP/Update.to.3.14.5.ct
/usr/platform/SUNW,UltraSPARC-IIi-Netract/OBP/Update.to.3.14.6.ct
/usr/platform/SUNW,UltraSPARC-IIi-Netract/OBP/Update.to.3.14.7.ct

Problem Description:

4785285 RFE: Need to activate blinking led at obp level for boards with bad presence pin
 
(from 110790-05)
4635829 110790-04 fails to install on a diskless client
 
(from 110790-04)
4466477 montecarlo requires support for dual console (ttymux)
4397444 glm fcode should use READ CAPACITY to find out the block size
 
(from 110790-03)
4411063 Need to support both EDO and SDRAM memory modules on Montecarlo
 
(from 110790-02)
4411063 Need to support both EDO and SDRAM memory modules on Montecarlo
 
(from 110790-01)
4389133 s8u3b6 install hangs after 'configuring /dev and /devices'
4373084 default input-device and output-device should be "ttya"
4367982 OBP 3.14.1 ct: set-defaults sets pcib-probe-list incorrectly.

Patch Installation Instructions:
-------------------------------- 
For Solaris 8 release, refer to the man pages for instructions on
using 'patchadd' and 'patchrm' scripts provided with Solaris.
Any other special or non-generic installation instructions should be
described below as special instructions.  The following example
installs a patch to a standalone machine:
 
        example# patchadd /var/spool/patch/109586-01
 
The following example removes a patch from a standalone system:
 
        example# patchrm 109586-01
 
For additional examples please see the appropriate man pages.

Special Install Instructions:
----------------------------- 
 
    This README is intended for users who wish to upgrade the firmware
    in their Netra ct system Flash PROM.
 
This patch contains a script that can be used to upgrade the Open
Boot PROM (OBP) image of a Netra ct system.
 
You should first create a backup of your current OBP NVRAM settings
by entering the command "/usr/sbin/eeprom &gt; /nvram.settings"
 
When you are ready to upgrade the OBP, run the script:
/usr/platform/SUNW,UltraSPARC-IIi-Netract/OBP/Update.to.3.14.7.ct
 
The script will prompt with a warning and allow Continuation
of Termination of the OBP upgrade.  Answer "C" to install the
OBP upgrade.
 
WARNING!!!
----------
  Do not interrupt or power-down your system while the OBP is
being upgraded!  Doing so may result in in OBP flash damage
and may be unrecoverable
----------
 
After the OBP upgrade, the system must be reset.  As root,
enter the command "reboot" to reset the system.
 
Based on the OBP version in the system before the upgrade, the
NVRAM configurations variables may be lost.  You can use
the /nvram.settings backup file to restore any specific
NVRAM settings for your site.  A reboot will be required for
any changed NVRAM settings to take effect.

README -- Last modified date:  Friday, December 6, 2002

</pre></body></html>